ISOMAT MT-200

Pre-mixed, cement-based mortar for fixing marbles, that needs only the addition of water. The composition of ISOMAT MT-200 ensures the maintenance of the color and the whiteness of the marble, while it prevents their staining.

  • Simplification and acceleration of application.
  • Provides high initial and final adhesive strength.
  • Excellent workability.
  • Stable standardized properties.
  • Due to the special particles size granulation of the product, the mortar does not lose the colume during the application of the marble.
  • Suitable for indoor or outdoor use.

It is used for fixing marbles of all dimensions on cement-based substrates. Suitable for indoor and outdoor applications.
ISOMAT MT-200 is added into clean water under continuous stirring, until a mortar with the required workability is formed. The mortar is applied by hand using a trowel at a maximum layer thickness of 3 cm. In cases where extremely high adhesion of the marbles is required. Then, in addition it should be used the adhesive ISOMAT AK-MARBLE. The adhesive is applied on the marble and is spread (combed) using a notched trowel. The marbles should be fixed within 10 minutes in order to avoid “skin” formation at the surface of ISOMAT MT-200.

  • The temperature during application must be at least +5 oC.
  • In cases where the properties of ISOMAT MT-200 should be improved (bonding to the substrate, elasticity) it is recommended the addition of polymer latex ADIPLAST into the mixing water in proportion of 1:1 by volume.
  • ISOMAT MT-200 contains cement and reacts as alkaline with moisture, so it is classified as irritant.
  • Consult usage risks and safety advice written on the bag.
null

Surface: Concrete, cement

null

Application: Roller