Transparent ecological protective product for wooden floors, available in glossy and matt versions. The product forms a walkable protective film which enhances the natural beauty of the wood used for flooring, prevents water penetration and attack by mites and molds. It does not turn yellow, is scratch-resistant and has high wear resistance.
Technical Characteristics
Ecological, transparent varnish for wood flooring, available both in gloss and matt finishes. The product forms a protective walkable film that brings out the natural beauty of the wood used for wood floorings. It blocks the penetration of water and the attack of mites and mould. The product is non yellowing, scratch resistant and has a high resistance to wear.
Ideal Use
Protection of wooden floors.
Surface Preparation
Clean the surface to be treated degreasing it with the appropriate products. On new wood apply a coat of TURAPORI ECOLOGICO, sand down using fine sandpaper. On already treated wood, clean and sand down the surface using fine sandpaper. Prior to application, always check that the surface is dry and that the wood has a humidity level of less than 15%.
Application method
After having prepared the surface, apply two coats of ECOPROTETTIVO PARQUET leaving 3-4 hours between coats. The product can be applied by brush, roller or spray gun. It is recommended to sand down the surface in cases where the second coat is applied more than 24 hours after the first. Apply on wood with a humidity level of less than 15%.
Safety Information
The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. There is no risk of any dangerous polymerisation. The product is considered to be a non-dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.
Specifications
Clean the surface to be treated. Degrease with suitable products and sand down using fine sandpaper. After having prepared the surfaces, apply one or two coats of a polyeurethanic varnish such as ECOPROTETTIVO PARQUET. All must be carried out in accordance with the norms of application.
