{"id":2453,"date":"2023-05-10T09:06:01","date_gmt":"2023-05-10T09:06:01","guid":{"rendered":"https:\/\/aedcolor.com\/?page_id=2453"},"modified":"2023-10-26T10:53:48","modified_gmt":"2023-10-26T10:53:48","slug":"isomat-ak-25","status":"publish","type":"page","link":"https:\/\/aedcolor.com\/index.php\/isomat-ak-25\/?lang=en","title":{"rendered":"ISOMAT AK 25"},"content":{"rendered":"

[vc_row][vc_column width=”2\/3″][vc_custom_heading text=”ISOMAT AK 25″ font_container=”tag:h2|font_size:50|text_align:left” use_theme_fonts=”yes”][\/vc_column][\/vc_row][vc_row][vc_column width=”1\/2″][vc_single_image image=”2454″ img_size=”full”][\/vc_column][vc_column width=”1\/2″][vc_column_text]ISOMAT AK-25 is a high-performance, ultra-flexible, cement-based tile adhesive, enhanced with polymers (resins), with extended open time and no vertical slip.<\/strong> Provides high adhesion strength and\u00a0 resistance to moisture. Certified according to EN 12004 and classified as C2 TE S2 adhesive. CE marked, ISOMAT AK-25 has received an Environmental Product Declaration (EPD) following an assessment of its life-cycle environmental impacts. Registration No: S-P-06170, The International EPD System.\u00a0<\/span>
\nISOMAT AK-25 is suitable for fixing all types of wall and floor tiles, including absorbent and non-absorbent tiles (e.g. gres porcellanato), natural stone, decorative bricks, large-format tiles, etc. Well-suited for applications where ultra flexibility, high adhesion and moisture resistance are required and for substrates subject to movement due to expansion\/contraction or vibration, such as balconies, flat roofs, heated floors, metal surfaces, wood floors, old tile layers, swimming pools, gypsum boards, etc. For indoor and outdoor applications.<\/span><\/p>\n

Substrate preparation<\/span><\/strong>
\nThe surface to be overlaid must be clean, free of dust, grease, paint, loose materials, etc. It is recommended to dampen the substrate before application.<\/span><\/p>\n

Application<\/span><\/strong>
\nISOMAT AK-25 is gradually added to water under continuous stirring, until a uniform paste is formed. A low-speed mixer is recommended for mixing. The mixture should be left to stand for about 5 minutes, before is slightly stirred again. The tile adhesive should be uniformly applied over the entire surface with a notched trowel. Tiles should be firmly fixed to the desired position. The applied mixture must be covered with tiles within 30 minutes to avoid film formation, i.e. before the adhesive film starts to set.<\/span>[\/vc_column_text][vc_row_inner][vc_column_inner width=”1\/2″]