{"id":3593,"date":"2023-05-27T12:59:21","date_gmt":"2023-05-27T12:59:21","guid":{"rendered":"https:\/\/aedcolor.com\/?page_id=3593"},"modified":"2024-01-13T10:49:09","modified_gmt":"2024-01-13T10:49:09","slug":"fibranxps-etics-gf","status":"publish","type":"page","link":"https:\/\/aedcolor.com\/index.php\/fibranxps-etics-gf\/?lang=en","title":{"rendered":"FIBRANxps ETICS GF"},"content":{"rendered":"

[vc_row][vc_column width=”2\/3″][vc_custom_heading text=”FIBRANxps ETICS GF” font_container=”tag:h2|font_size:50|text_align:left” use_theme_fonts=”yes”][\/vc_column][\/vc_row][vc_row][vc_column width=”1\/2″][vc_single_image image=”3252″ img_size=”full”][\/vc_column][vc_column width=”1\/2″][vc_column_text]<\/p>\n

\n
\n
\n
\n
\n
\n
\n
\n
\n
\n

FIBRANxps<\/i>\u00a0ETICS GF<\/b>\u00a0is a thermal insulation board made of extruded polystyrene, having a rough (waffle) surface for good adhesion of finishing layers. Shiplap edges prevent the formation of thermal bridges.<\/span><\/p>\n<\/div>\n<\/div>\n

\n
Application<\/span><\/strong>
\nThermal insulation gives unconditional protection in humid environment and\/or under extremely heavy mechanical load.<\/span><\/div>\n
    \n
  • Thermal protection of outer wall surfaces<\/span><\/li>\n
  • Thermal protection of plinth walls<\/span><\/li>\n
  • Thermal insulation of jambs, corners and roof soffits<\/span><\/li>\n
  • Thermal protection of interior wall surfaces.<\/span><\/li>\n<\/ul>\n

    Instalation<\/span><\/strong>
    \nAll construction requirements should be taken into account during the application of FIBRANxps panels. FIBRANxps panels should be placed on flat and clean surfaces. They can easily be cut using a sharp knife or heated wire. Most FIBRANxps product edges are L or D shaped. The panels are usually installed in a single layer. The application of a double layer is desirable for I shaped panels, to avoid the consequent formation of thermal bridges at the joins. Thermal insulation in the inverted roof application should be installed in a single layer. No naked flames should be used during the installation of FIBRANxps extruded polystyrene panels. Whenever FIBRANxps panels are to be applied over waterproofing\u00a0 film on basement walls, adhesive tape should be used. In theevent of basements with a high water table, the damp proofing product should be applied to the entire wall surface. When using FIBERxpa on larger surfaces, especially on warm flat roofs, the dilation or contraction of the panels due to temperature must be taken into account. The construction of expansion joins with stonewool is recommended in such cases.\u00a0<\/span><\/p>\n

    Management and storage<\/span><\/strong>
    \nFIBRANxps panels are resistant to cold weather, rain and snow, but not to long-term exposure to ultraviolet radiation from direct exposure to sunlight. Therefore the packaging must only be removed immediately prior to application of the material. In the event that the packaging is torn, the material must be protected from direct sunlight. Although FIBRANxps panels are among the most durable materials on the market, contact with sharp objects can destroy or warp their surface. FIBRANxps panels can be used up to a temperature of 75 oC. However, if stored outdoors and exposed to direct sunlight, or covered with dark-coloured material, they may deform due to high temperatures. FIBRANxps panels must not come into contact with organic solvents such as acetone, petrol or tar. If the panels are to be cleaned, a test of the material’s tolerance is recommended. Please consult our technical department, if necessary. They are generally resistant to soap and detergents, but not to bleach. FIBRANxps panels are partially resistant to substances such as vegetable oils and fats, paraffin, phenol, which means that long-term exposure to such substances can affect the appearance or structure of their surface. FIBRANxps panels are particularly resistant to water asphalt materials, lime, cement, lime mortar, seawater, as well as thin dilute acids nd silicones. A preliminary test is recommended in case of doubt.<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n

    \n
    <\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

     <\/p>\n

    \n
    <\/div>\n<\/div>\n
    \n
    \n
    <\/div>\n<\/div>\n
    <\/div>\n<\/div>\n

    [\/vc_column_text][vc_row_inner][vc_column_inner width=”1\/2″]

      \n
    • Unconditional protection in humid environment and\/or under extremely heavy mechanical<\/span><\/li>\n<\/ul>\n<\/div>[\/vc_column_inner][vc_column_inner width=”1\/2″]
        \n
      • Thermal protection of outer wall surfaces<\/span><\/li>\n<\/ul>\n<\/div>[\/vc_column_inner][\/vc_row_inner][\/vc_column][\/vc_row]<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

        [vc_row][vc_column width=”2\/3″][vc_custom_heading text=”FIBRANxps ETICS GF” font_container=”tag:h2|font_size:50|text_align:left” use_theme_fonts=”yes”][\/vc_column][\/vc_row][vc_row][vc_column width=”1\/2″][vc_single_image image=”3252″ img_size=”full”][\/vc_column][vc_column width=”1\/2″][vc_column_text] FIBRANxps\u00a0ETICS GF\u00a0is a thermal insulation board made of extruded polystyrene, having a rough (waffle) surface for good adhesion of finishing layers. Shiplap edges prevent the formation of thermal bridges. Application Thermal insulation gives unconditional protection in humid environment and\/or under extremely heavy mechanical load.…<\/p>\n","protected":false},"author":2,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-3593","page","type-page","status-publish","hentry","description-off"],"_links":{"self":[{"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/pages\/3593","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/comments?post=3593"}],"version-history":[{"count":3,"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/pages\/3593\/revisions"}],"predecessor-version":[{"id":10187,"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/pages\/3593\/revisions\/10187"}],"wp:attachment":[{"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/media?parent=3593"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}