{"id":6451,"date":"2023-07-14T08:54:23","date_gmt":"2023-07-14T08:54:23","guid":{"rendered":"https:\/\/aedcolor.com\/?page_id=6451"},"modified":"2023-10-13T06:39:09","modified_gmt":"2023-10-13T06:39:09","slug":"aquamat-elastic","status":"publish","type":"page","link":"https:\/\/aedcolor.com\/index.php\/aquamat-elastic\/?lang=en","title":{"rendered":"AQUAMAT-ELASTIC"},"content":{"rendered":"

[vc_row][vc_column width=”2\/3″][vc_custom_heading text=”AQUAMAT-ELASTIC<\/p>\n

” font_container=”tag:h2|font_size:50|text_align:left” use_theme_fonts=”yes”][\/vc_column][\/vc_row][vc_row][vc_column width=”1\/2″][vc_single_image image=”3543″ img_size=”full”][\/vc_column][vc_column width=”1\/2″][vc_column_text]<\/p>\n

\n
\n
\n
\n
\n
\n
\n
\n
\n
AQUAMAT-ELASTIC is a two-component, highly flexible, brushable waterproofing slurry consisting of a cement-based powder mortar (component A) and an emulsion resin (component B).<\/strong> After hardening, it forms a seamless, jointless membrane, with the following advantages:<\/span><\/div>\n
    \n
  • Crack-bridging ability.<\/span><\/li>\n
  • Total waterproofing against positive hydrostatic pressure up to 5 atm according to EN 12390-8. It can also withstand negative pressure.<\/span><\/li>\n
  • Vapor permeability.<\/span><\/li>\n
  • Suitability for potable water tanks, as well as food contact surface according to W-347.<\/span><\/li>\n
  • Resistance to UV radiation.<\/span><\/li>\n
  • Protection of concrete from carbonation.<\/span><\/li>\n
  • No corrosive effect on the reinforcing steel in concrete.<\/span><\/li>\n
  • Resistance to sewage water (sewage water treatment plants, sewers, etc).<\/span><\/li>\n
  • Resistance to aging.<\/span><\/li>\n
  • Bonding to slightly wet surface without priming.<\/span><\/li>\n
  • Simple and low cost application.<\/span><\/li>\n
  • Suitability for green roofs, flower beds, etc., as it is certified as root-resistant.<\/span><\/li>\n
  • Also works as a radon barrier.<\/span><\/li>\n<\/ul>\n

    It is used for waterproofing surfaces made of concrete, plaster, bricks, cement blocks, terrazzo, gypsum boards, wood, metal, etc. Ideal in cases where high flexibility and good adhesion of the waterproofing layer are required. Suitable for waterproofing substrates subject to expansion-contraction or vibration and show or are expected to show hairline cracks, such as flat roofs, balconies, above ground water tanks, swimming pools, inverted roofs, etc. It can also be used for waterproofing basements, internally or externally, against moisture or water under pressure.<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

    Application<\/span><\/strong>
    \nThe 25 kg bag of component A\u00a0 is added to the 10 kg of the liquid component B under continuous stirring, until a uniform, viscous mixture is formed, suitable for brush application. The substrate must be pre-wetted to a saturated surface dry condition before application. The surface to be covered with AQUAMAT-ELASTIC must be free of standing water. The material is applied by brush in two or more layers, depending on the water load. Layers thicker than 1 mm should be avoided, because the material may crack. Each new coating is applied after the previous one has dried. The freshly coated surface should be protected from high temperatures, rain and frost. In case AQUAMAT-ELASTIC needs to be locally reinforced *inside corners where forming fillets is not necessary, at junctions, etc.( the use of a 10 cm wide polyester fleece (30 g\/m2) or fiberglass mesh (65 g\/m2) is recommended.<\/span><\/p>\n

    \n
    <\/div>\n<\/div>\n
    \n
    \n
    <\/div>\n<\/div>\n
    <\/div>\n<\/div>\n

    [\/vc_column_text][vc_row_inner][vc_column_inner width=”1\/2″]

      \n
    • In case of water under pressure, care should be taken so that pumping, which keeps the water level low, does not stop before AQUAMAT-ELASTIC has sufficiently hardened. About 7 days are needed.\u00a0<\/span><\/li>\n
    • In case of water under pressure, the structure bearing the waterproofing layer (wall, floor, etc.) should be properly designed in order to be sufficiently static to withstand hydrostatic pressure.<\/span><\/li>\n
    • In case of operational walkable floors, the floor surface waterproofing with AQUAMAT-ELASTIC should be protected with a cement mortar layer.<\/span><\/li>\n<\/ul>\n<\/div>[\/vc_column_inner][vc_column_inner width=”1\/2″]
        \n
      • Temperature during application should be between +5oC and +35oC.<\/span><\/li>\n
      • Due to cement content, the component A of AQUAMAT-ELASTIC reacts with water forming alkaline solutions, thus is classified as irritant.<\/span><\/li>\n
      • Consult the directions for safe use and precautions written on the packaging before use.<\/span><\/li>\n<\/ul>\n<\/div>[\/vc_column_inner][\/vc_row_inner][vc_row_inner][vc_column_inner width=”1\/2″]
        \n
        \n\t\"null\"\n<\/div><\/div><\/div><\/div>

        Surface: Concrete<\/h3><\/div> <\/div> <\/div> [\/vc_column_inner][vc_column_inner width=”1\/2″]
        \n
        \n\t\"null\"\n<\/div><\/div><\/div><\/div>

        Application: Brush<\/h3><\/div> <\/div> <\/div> [\/vc_column_inner][\/vc_row_inner][\/vc_column][\/vc_row]<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

        [vc_row][vc_column width=”2\/3″][vc_custom_heading text=”AQUAMAT-ELASTIC ” font_container=”tag:h2|font_size:50|text_align:left” use_theme_fonts=”yes”][\/vc_column][\/vc_row][vc_row][vc_column width=”1\/2″][vc_single_image image=”3543″ img_size=”full”][\/vc_column][vc_column width=”1\/2″][vc_column_text] AQUAMAT-ELASTIC is a two-component, highly flexible, brushable waterproofing slurry consisting of a cement-based powder mortar (component A) and an emulsion resin (component B). After hardening, it forms a seamless, jointless membrane, with the following advantages: Crack-bridging ability. Total waterproofing against positive hydrostatic pressure up to…<\/p>\n","protected":false},"author":2,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-6451","page","type-page","status-publish","hentry","description-off"],"_links":{"self":[{"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/pages\/6451","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/comments?post=6451"}],"version-history":[{"count":4,"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/pages\/6451\/revisions"}],"predecessor-version":[{"id":9505,"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/pages\/6451\/revisions\/9505"}],"wp:attachment":[{"href":"https:\/\/aedcolor.com\/index.php\/wp-json\/wp\/v2\/media?parent=6451"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}