{"id":8478,"date":"2023-08-30T11:41:17","date_gmt":"2023-08-30T11:41:17","guid":{"rendered":"https:\/\/aedcolor.com\/?page_id=8478"},"modified":"2023-08-30T11:41:18","modified_gmt":"2023-08-30T11:41:18","slug":"flowcret-1-10-express","status":"publish","type":"page","link":"https:\/\/aedcolor.com\/index.php\/flowcret-1-10-express\/?lang=en","title":{"rendered":"FLOWCRET 1-10 EXPRESS"},"content":{"rendered":"

[vc_row][vc_column width=”2\/3″][vc_custom_heading text=”FLOWCRET 1-10 EXPRESS” font_container=”tag:h2|font_size:50|text_align:left” use_theme_fonts=”yes”][\/vc_column][\/vc_row][vc_row][vc_column width=”1\/2″][vc_single_image image=”8476″ img_size=”full”][\/vc_column][vc_column width=”1\/2″][vc_column_text]Fast-setting, self-leveling cementitious mortar for leveling floor substrates, enriched with polymers (resins).<\/strong> Features high mechanicl strength, superb adhesion to the substrate, excellent workability, fast hardening and drying time and low shrinkage. Provides a smooth, flat and durable final with any further finishing layer. Suitable for layers 1-10 mm thick. Certified according to EN 13813 and classified as a screed material CT-C40-F7-AR0,5. CE marked. FLOWCRET 1-10 EXPRESS has received an Environmental Product Declaration (EPD) folowing an assessment of its life-cycle environmental impacts. Registration No: S-P-06174. The International EPD System. Ideal for fast smoothening and leveling of concrete floors, cemen screeds, terrazzo floors, etc. to be covered with all kinds of tiles, carpet, parquet, plastic or wooden floors, vinyl tiles, etc. Suitable only for interior use. Suitable for leveling floors with underfloor heating system.<\/span><\/p>\n

Substrate<\/span><\/strong><\/p>\n

The substrate must be dry, stable and also free of dust, grease, loose particles, etc.<\/span><\/p>\n

Priming<\/span><\/strong><\/p>\n

Absorbent surfaces e.g. concrete and cement screeds are primed with the acrylic primer UNI-PRIMER. Product application follows once the primer has completely dried (after approx 2 h)<\/span><\/p>\n

Smooth or non-absorbent surfaces should be primed with SUPERGRUND adhesion promoter. Product application folows once the primer has completely dried, approx. 1-2 hlater). Primer consumption: 100-200 g\/m2.<\/span><\/p>\n

Application<\/span><\/strong><\/p>\n

FLOWCRET 1-10 EXPRESS is gradually added to water under continuous stirring, until a homogeneous, lump-free, low-viscosity mass is formed. The mixture is left for about 2-3 minutes to settle and is then stirred again for 1 more minute. A low speed electric mixer is recommended for mixing. The mortar is poured onto the primed substrate is one layer and is spread to the desired thickness with a large metal trowel, squeegee, etc. As soon as the product has self-levelled it must be rolled immediately with a suitable spiked roller to release all\u00a0 the air entrapped within its mass. Following the completion of its application and after the required drying time has elapsed. FLOWCRET 1-10 EXPRESS should be covered or adequetely protected with a floor overlay (tiles, plastic flooring, resin coating, varnish, etc) For greater layer thickness, up to 30 mm, it is recommended to use FLOWCRET 3-30 EXPRESS.<\/span>[\/vc_column_text][vc_row_inner][vc_column_inner width=”1\/2″]