{"id":8512,"date":"2023-08-31T09:05:04","date_gmt":"2023-08-31T09:05:04","guid":{"rendered":"https:\/\/aedcolor.com\/?page_id=8512"},"modified":"2023-08-31T09:05:04","modified_gmt":"2023-08-31T09:05:04","slug":"isomat-bi-100-2","status":"publish","type":"page","link":"https:\/\/aedcolor.com\/index.php\/isomat-bi-100-2\/?lang=en","title":{"rendered":"ISOMAT BI-100"},"content":{"rendered":"

[vc_row][vc_column width=”2\/3″][vc_custom_heading text=”ISOMAT BI-100″ font_container=”tag:h2|font_size:50|text_align:left” use_theme_fonts=”yes”][\/vc_column][\/vc_row][vc_row][vc_column width=”1\/2″][vc_single_image image=”8510″ img_size=”full”][\/vc_column][vc_column width=”1\/2″][vc_column_text]Water-based polymer emulsion with high penetration ability. When applied on concrete floors or cement screeds, it seals and dustproofs their surface.<\/strong> ISOMAT BI-100 can also be used as a surface hardener for crumbled floorings and surfaces in order to increase their strength and wear resistance. Moreover, it eliminates the permeability of floorings and makes them easy to clean. ISOMAT BI-100 isused on concrete floors or cement screeds in places such as basements, warehouses, light traffic parking lots etc. Suitable for indoor and outdoor use.<\/span><\/p>\n

Substrate preparation<\/span><\/strong><\/p>\n

The surface must be dry and free of dust, grease, dirt etc. For better impregnation of ISOMAT BI-100, the surface should be prepared by grinding and cleaning of dust.<\/span><\/p>\n

Application<\/span><\/strong><\/p>\n

ISOMAT BI-100 is thoroughly stirred and uniformly applied on the substrate by brush, roller or spraying, until full impregnation. Forvery absorbent surfaces, it is usually required to apply a second layer, after the first one has dried.<\/span>[\/vc_column_text][vc_row_inner][vc_column_inner width=”1\/2″]