{"id":9924,"date":"2023-12-13T08:57:16","date_gmt":"2023-12-13T08:57:16","guid":{"rendered":"https:\/\/aedcolor.com\/?page_id=9924"},"modified":"2023-12-13T08:57:30","modified_gmt":"2023-12-13T08:57:30","slug":"aquafix-2","status":"publish","type":"page","link":"https:\/\/aedcolor.com\/index.php\/aquafix-2\/?lang=en","title":{"rendered":"AQUAFIX"},"content":{"rendered":"

[vc_row][vc_column width=”2\/3″][vc_custom_heading text=”AQUAFIX” font_container=”tag:h2|font_size:50|text_align:left” use_theme_fonts=”yes”][\/vc_column][\/vc_row][vc_row][vc_column width=”1\/2″][vc_single_image image=”6788″ img_size=”full”][\/vc_column][vc_column width=”1\/2″][vc_column_text]AQUAFIX is a rapid-setting cement, showing a hardening reaction that starts immediately after the addition of water.<\/strong> AQUAFIX is used for instant plugging of local or superficial water leaks, rapid fixing and anchoring.<\/span>
\nSubstrate preparation<\/span><\/strong>
\nThe substrate must be stable, clean and moistened, if dry. Any loose material (paint, plaster, etc.) should be removed to expose a stable substrate (concrete or masonry).<\/span>
\nApplication<\/span><\/strong>
\na) Sealing of leaking points<\/span><\/span><\/em>
\nThe point of leakage (crack, hole, etc) should be widened in a conical shape (getting wider as it goes deeper) to a depth of 2-3 cm. A small quantity of AQUAFIX should be gradually added to water and mixed for 5-10 seconds, until it becomes like wet clay. The mixture is pressed onto the leak and held there for approx. 1 minute, until it hardens sufficiently.<\/span>
\nb) Sealing of leaking surfaces<\/span><\/span><\/em>
\nThe wet and stable surface should be first brushed with AQUAMAT-F (consumption 200-300 g\/m2) and then immediately with AQUAMAT (consumption approx. 1.5 kg\/m2). While this layer is still fresh, it should be rubbed with AQUAFIX powder (consumption 1.0-1.5 kg\/m2) until the surface dries. Afterwards, the surface should be brushed again with AQUAMAT-F, followed by at least 2 layers of AQUAMAT, until a total thickness of 2-4 mm is achieved. If there is possibility for cracking, AQUAMAT-FLEX or AQUAMAT-ELASTIC is recommended for the last 2 layers.<\/span>[\/vc_column_text][vc_row_inner][vc_column_inner width=”1\/2″]