The beauty of Italian stucco featuring a new look with golden reflections that warm up and bestow richness and elegance to any type of environment. It is a decorative indoor paint based on natural eco-friendly lime, which, applied in an artisan manner, can be used to obtain different effects from glossy to semi-glossy to matt while providing seamless marbled surfaces.
AUREUM by OIKOS, regal alchemy, gold for walls, a decorative, golden finish created using lime putty and golden powders with a low environmental impact. The shades of AUREUM derive from the colours of the earth and the warm tones of nature; combining elements from historical re-search and an understanding of contemporary technology, it has been possible to give rise to a product that is able to adapt itself to both modern and traditional settings. The product makes it possible to achieve precious and elegant finishes in various golden tones, creating, according to the sources of light and the angle at which the surface is looked at, lavish patterns on a golden texture; furthermore, the vivaciousness of the golden reflections, lights up the wall, giving the setting an unmistakeable elegance with a silky sensation to the touch. The product is non inflammable and friendly to both humans and the environment. Formaldehyde-free.

Surface preparation
Clean the surface to be decorated, removing any loose or flaking material. Apply a coat of the fixative IL PRIMER by OIKOS in order to insure perfect adhesion. Screed the surface with STUCCO IN PASTA PER RASATURA by OIKOS.

How to apply
For an impeccable finish, apply AUREUM in two coats using the special Inox steel trowel by Oikos if necessary it is possible to add up to a maximum of 5% water tio the product in order to obtain the right fluidity:

• First coat: proceed to spread a thin coat of AUREUM directly on the STUCCO IN PASTA PER RASATURA, making large trowel marks to completely cover the surface. Wait 6 – 8 hours until dry:
• Finish: apply a very thin coat of product, partially overlapping the trowel marks and gently smoothing the surface with the blade of the trowel; after approximately one hour, pass over the surface for a final time to fully smooth the finish.