Decorative wax in paste created to enhance the shine of the stucco. High yield, thanks to the simple and quick application by spatula, in a single coat, it allows to obtain excellent marble effects while respecting the processing and naturalness of the stucco on which it is applied.
Technicaal characteristics
CERA per STUCCO is a decorative wax in paste form, created to axalt the shine of stucco. Thanks to its quick and simple, one coat, application by trowel or sponge, it is possible to obtain excellent marble effects whilst still respecting the technique and the natural feel of the stucco finish on which the Cera per Stucco is applied. The additives in the product facilitate its application and make it easier to polish. Cera per stucco protects the surface on to which it is applied making it rub resistant. It is non inflammable, has no added formaldehyde and is friendly to both humans and the environment.
Ideal Use
Polishing and protection of interior walls and furnishing coated with decorative stucco.
Surface preparation
Wait at least 6-8 hours after the application of the lart coat of stucco and in any case until it is completely dry.
Application method
Apply a single, even coat of CERA per STUCCO using a float (inox steel trowel). On uneven surfaces it is possible to apply the product using a synthetic sponge. To further enhance the shine, after 24 hours it is possible to polish the surface using a soft cloth. Attention: avoid leaving too much product on the surface because this could cause the formation of light haloes.
Safety Information
The product is free of heavt metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non-dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.