Siloxane mineral paint, water repellent, with matt effect. Formulated to provide an exceptional impermeability to atmosperic agents and excellent breathability, it prevents the formation of mold and algae, keeps the masonry always dry and guarantees optimal hygienic conditions, increasing living comfort.

Technical Qualities
DECORSIL ROMA by OIKOS is a special, siloxanic, water based, matt finish, mineral paint for exteriors. It is water repellent, vapour permeable and extremely resistant. The product consists of siloxanic resins in water dispersion, which guarantee and excellent weatherability and maintain the vapour permeability of the substrate unaltered. Thanks to its water repellence, DECORSIL ROMA by OIKOS keeps masonry dry and improves energy saving; it also assures the best hygienic conditions and house comfort. DECORSIL ROMA by OIKOS can be used as finish coat on high diffusion plasters and on all wall surfaces. Due to its special characteristics, the product is recommended above all for prestige buildings and for restoration of old buildings of historical value. For a better prevention against algae and mould we recommend the addition of the sanitizing product SterylPlus. Additionally, the product is resistant to acids and frost thaw cycle DECORSIL ROMA by OIKOS has a  low odour level, is non inflammable and is friendly to both humans and the environment,
Compliant with CAM (Minimum Environmental Criteria), III level certification. EPD.

Ideal Use
Exterior walls of prestigious buildings, recommended for high diffusion and dehumidification plasters.

Surface Preparation
The surfaces must be completely dry and mature, new plaster must mature at least 30 days to allow the complete carbonisation of the surface. Clean the surfaces to be decorated and remove loose or flaking materials. In case of new plasters, make sure the substrate is thoroughly dry. In case of restoration works, repair water infiltrations or leaks. Allow the wall to dry, then apply the special primer DECORSIL PRIMER or DECORSIL PRIMER PIGMENTATO by OIKOS.

Application Method
Allow the primer to dry for 12 hours, then apply two coats of DECORSIL ROMA by OIKOS by roller or brush. Wait 6 hours between coats. Dilute the product with 15-20% drinkable water.

Finish
In order to obtain a wash effect apply on the dry surface one coat of VELDECOR by OIKOS and work it over the surface with a brush, sponge or glove by OIKOS.

Safety Information
The product if free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.

Specifications
Clean the surfaces to be decorated and remove loose or flaking materials. In case of new plasters, make sure the substrate is thoroughly dry. In case of restoration works, repair water infiltrations or leakages.