DUROCRET-PLUS

DUROCRET-PLUS is a pre-mixed, polymer-modified, fiber-reinforced cement mortar, without corrosive substances, thus suitable for exterior and interior use. It offers:

  • Abrasion resistance
  • Very good bonding to the substrate
  • Water impermeability
  • Simplification of works.

It is classified as a PCC R3 mortar type for concrete repairs, according to EN 1504-3. Certificate Nr: 2032-CPR-10.11. DUROCRET-PLUS has received an Environmental Product Declaration (EPD) following an assessment of its life-cycle environmetal impacts. Registration No: S-P-09183, The International EPD System.
DUROCRET-PLUS is used for concrete or brickwork repairs, as well as patches, forming fillets etc. DUROCRET-PLUS is applied in layers of up to 3 cm in case of large surfaces and in layer of up to 5 cm for localized repairs.

Substrate preparation
The substrate should be clean, free of dust, oily or loose materials etc. Before applying DUROCRET-PLUS, the substrate should be dampened. 

Application 
DUROCRET-PLUS is added into the water under continuous stirring, until the mixture formed has the desired workability. The product is applied with a trowel, as usual.

DUROCRET-PLUS is a pre-mixed, polymer-modified, fiber reinforced cement mortar, without corrosive substances, thus suitable for exterior and interior use. It offers:

  • Abrasion resistance
  • Very good bonding to the substrate
  • Water impermeability
  • Simplification of works.

It is classified as a PCC R3 mortar type for concrete repairs,according to EN 1504-3. DUROCRET-PLUS has received an Environmental Product Declaration (EPD) following an assessment of its life-cycle environmental impacts. Registration No: S-P-09183, The International EPD System.

Substrate Preparation

The substrate should be clean, free of dust, oily or loose materials etc. Before applying DUROCRET-PLUS, the substrate should be dampened.

Application

DUROCRET-PLUS is added into the water under continuous stirring, until the mixture formed has the desired workability. The product is applied with a trowel, as usual.

DUROCRET-PLUS is used for concrete or brickwork repairs, as well as patching, forming fillets etc. DUROCRET-PLUS is applied in layers of up to 3 cm in case of large surfaces, and in layers of up to 5 cm for localized repairs.

  • Temperature during the application should be at least +5oC.
  • During the summer, DUROCRET-PLUS should be dampened after being applied, to avoid water loss, due to high temperatures.
  • The product contains cement, which reacts with water forming alkaline solutions and is thus classified as irritant.
  • Consult the directions for safe use and precautions written on the package.
null

Surface: Concrete, cement

null

Application: Trowel