DUROFLOOR-PUC MF6

DUROFLOOR-PUC MF6 is a self-leveling, fast setting flooring system, based on cement and polyurethane resins. It offers the following advantages:

  • High mechanical strength
  • Excellent chemical resistance
  • Excellent adhesion to the substrate
  • May be applied to 7-days concrete
  • Quick application
  • Very good workability and self-leveling properties
  • Broad operating temperature range
  • Odorless and non-toxic
  • Easy-to-clean

Certified according to EN 1504-2 and classified as a coating for surface protection of concrete. CE marked. Classified as a SR-B2-AR0,5-IR10 type floor coating material according to EN 13813. Certified for safe flooring applications in food handling and processing areas (ISEGA, Germany, Certification No.:53641 U20).

Substrate

The surface to be processed must be:

  • Dry and solid
  • Free from materials that might impair adhesion, such as dust, loose particles, grease, etc.
  • Protected from below-surface moisture

Application

DUROFLOOR-PUC MF6 is applied right after mixing the components, using a notched trowel. The self-leveling layer should be rolled using a special spiked roller, to help trapped air escape. This way a bubble-free layer of uniform thickness is achieved. Applying DUROFLOOR-PUC MF6 on surfaces exposed to sun radiation does not affect the mechanical and chemical stresses of the material, but it could bring out variations in the final color (ligh color shades could become yellowish).

  • The processing time ofDUROFLOOR-PUC MF6 is significantly affected by ambient temperature. The ideal temperature of application is between +15°C and +20°C, in order to ensure optimal workability and curing time.
  • Before applying the material on cementitious substrates, contraction-expansion joints should be placed at every 25 m2 and filled with proper elastic materials after the end of the application.
  • After application, the fresh surface of DUROFLOOR-PUC MF6 must be protected for about 4-6 hours (depending on the weather conditions) from moisture, as it may adversely affect the final finishing of the material and disrupt the hardening.
  • Do not mix DUROFLOOR-PUC MF6 with other binding materials or other additives, such as solvents.
  • Do not use the mix that has already begun to set in the mixing tank.
  • DuROFLOOR-PUC MF6 is not applied on metal surfaces, tile surfaces, wooden or asphalt substrates and lighweight concrete.
  • After hardening, DUROFLOOR-PUC MF6 is totally harmless.
  • Please consult the safety instructions written on the packaging before use.
  • DUROFLOOR-PUC MF6 is intended for professional use only.
null

Surface: Concrete, cement

null

Application: Trowel