EKOSTRIPPER is an ecological paint stripper capable of removing all types of synthetic paint products from any surface. The product can remove multiple layers of paint if left to act for the necessary time. Totally free of toxic substances, it can also be used in non-ventilated indoor environments.

Technical Qualities
EKOSTRIPPER is an ecological stripper for removing any kind of synthetic paint from every surface. The product can strip more coats of paint when left on the surface for the required time. The total absence of dangerous emissions even allow its being used in ventilated interiors. The slight coloration of EKOSTRIPPER helps insure an even application of the product over the whole surface.

Ideal Use
Interior and exterior surfaces coated with synthetic products.

Surface Preparation
Apply EKOSTRIPPER by using a brush or trowel and wait 1 to 24 hours according to the coats of paint to be removed. The consistency of the product makes it possible to even be applied on vertical surfaces. After having left the product to act on the surface, remove both EKOSTRIPPER and the underlying paint coats using a spatula or scraper then clean the treated surface with water.

Safety Information
The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non-dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.

Specifications
Apply a paint stripper such as EKOSTRIPPER by OIKOS leaving the product to act according to the number of coats to be removed. The consistency of the product makes it possible to even be applied on vertical surfaces. Proceed to then scrap the surface and following this, clean the treated surface with water. All must be carried out following closely all application instructions.