EPOMAX-EK is a two-component epoxy system without solvents, offering very strong adhesion to the substrate, high hardness and mechanical strength. It is significantly resistant to acids, alkalis, detergents, sea water and temperature variations. Certified according to EN 1504-4 and classified as a structural bonding agent for mortar or concrete. Certificate No.: 2032-CPR-10.11. CE marked.
EPOMAX-EK is used to restore damages on concrete and cement mortars. Also suitable for reinforcement anchoring, as well as sealing cracks that will be repaired with EPOMAX-L10, EPOMAX-L20 or DUREBOND epoxy injection resins. It bonds concrete, iron, stone, wood, etc.
Substrate preparation
The application surface should be:
- Dry and durable.
- Free of materials that might impair bonding, e.g. dust, grease, loose particles, etc.
Mixing of the components
Components A (resin) and B (hardener) are packed in two separate containers, having the correct predetermined mixing ratio by weight. Thoroughly mix the whole quantity of comp. A with the whole quantity of comp. B, until a uniform grey mixture is obtained. The components should be mixed for about 5 minutes, using an appropriate hand tool (e.g. small trowel). It is important to thoroughly stir the mixture near the sides and bottom of the container to achieve uniform dispersion of the hardener.
Application – Consumption
EPOMAX-EK is applied by trowel on a dry, clean surface.
Consumption: Approx. 1.85 kg/m2/mm of layer thickness.
EPOMAX-EK is supplied in packages (A+B) of 1 kg and 4 kg, with components A and B having a fixed proportion by weight. 12 months from production date if stored in original sealed packaging, in areas protected from humidity and direct sunlight. Recommended storage temperature between +5 oC and +35 oC.
