EPOMAX-STUCCO is a two-component epoxy system without solvents, offering very strong bonding to the substrate, high hardness and high mechanical strength. It is significantly resistant to acids, alkalis, detergents, sea water and temperature variations. Certified according to EN 1504-4 and classified as a structural bonding agent . Certificate No.: 2032-CPR-10.11.
EPOMAX-STUCCO is ideal for puttying surfaces. It is also used for bonding of concrete, steel, stone, wood, etc., for restoring damages on concrete and screeds, as well as for sealing cracks that will be repaired with EPOMAX-L10, EPOMAX-L20 or DUREBOND epoxy injection resins.
- Dry and durable.
- Free of materials that might impair bonding, e.g. dust, grease, loose particles, etc.
Mixing of the components
Components A (resin) and B (hardener) are packaged in two separate containers, at a fixed mixing ratio. The are placed into a clean container and mixed for about 5 minutes with an appropriate hand tool (e.g. a small trowel), until a uniform pasty putty is formed. In case less quantity is required (than the one available in the container), equal quantities by volume of comp. A and comp. B are thoroughly mixed in a clean container, as described above.
Application – Consumption
EPOMAX-STUCCO is applied by trowel or spatula on a dry and clean surface. Consumption: Approx. 1.35 kg/m2/mm of layer thickness.
EPOMAX-STUCCO is supplied in containers (A+B) of 1 kg, with components A and B having a fixed ratio by weight. 12 months from production date if stored in original, sealed packaging, in areas protected from humidity and direct sunlight. Recommended storage temperature between +5 oC and +35 oC.
