EPOXYCOAT-VSF

EPOXYCOAT-VSF is a two-component, solvent-free, colored epoxy system, offering high hardness and abrasion resistance. Specifically designed for highly aggressive chemical environments, it shows resistance to acids, alkalis, petroleum products, solvents, water, seawater, etc. Certified according to EN 1504-2 and classified as a coating for surface protection of concrete. Certificate No.: 2032-CPR-10.11. CE marked.

EPOXYCOAT-VSF is used as a protective  and decorative coating on cement-based substrates, e.g. concrete, plaster, cement screeds, and metal surfaces. Suitable for industrial areas, laboratories, canned food factories, wine-making factories, slaughterhouses, gas stations, car repair shops, etc. Also suitable for food contact surfaces according to W-347, ISO 8467.

Application – Consumption

EPOXYCOAT-VSF should be applied within 24 hours from priming and after the primer has dried. EPOXYCOAT-VSF is used as is. It is applied by roller, brush or spray in at least 2 coats. The second coat is applied after the first one has dried, but within 24 hours. 

EPOXYCOAT-VSF is supplied in containers (A+B) of 10 kg, with components A and B at a fixed ratio by weight.

  • Working time of epoxy materials is affected by the ambient temperature. The ideal temperature of application is between +15°C and +25°C, for which the product obtains optimal workability and curing time.
  • Bonding between successive coats may be severely affected by moisture or dirt.
  • Epoxy coats should be protected from moisture for 4-6 hours after application. Moisture may whiten the surface or/and make it sticky. It may also disturb hardening.
  • In case recoat time (between successive coat) is longer than expected or old floors are to be overlaid again, the surface should be thoroughly cleaned and ground before applying the new coat.
  • After hardening, EPOXYCOAT-VSF is totally safe for healthy.
null

Surface: Concrete, cement

null

Application: Brush, roller or spray