EPOXYCOAT-W

EPOXYCOAT-W is a two-component, colored, water-based epoxy system offering high strength and abrasion resistance to walls and floors. It is resistant to acids, alkalis, petroleum products, water and seawater. It is ideal for indoor use and is the product of choise in those applications where the use of solvents would be an issue. Certified according to EN 1504-2 and classified as a coating for surface protection of concrete. Certification No.: 2032-CPR-10.11. Also certified according to EN 13813 and classified as a SR-B2,0-AR0,5-IR5type floor coating material.CE marked. EPOXYCOAT-W has received an Environmental Product Declaration (EPD) following an assessment of its life-cycle environmental impacts. Registration No: S-P-09186. The international EPD System.

EPOXYCOAT-W is used as a protective and decorative coating on floors and walls, on cement-based substrates (e.g. concrete, plaster, screed, etc.) and metal surfaces.

Application to walls:

Suitable for industrial sites, workshops, slaughterhouses, canned food factories, wineries, tunnels, etc.

Application to floors:

Suitable for floors where medium mechanical stress is expected, such as storage areas and car parks

  • The workability of epoxy materials is affected by their temperature. The ideal temperature of application is between +15°C and +25°C  so that the product will be easly to use and cure as prescribed.
  • Bonding between successive layers may be severely affected by moisture or dirt present between them.
  • In case recoat time is longer than expected or in case old floors are to be overlaid again, the surface should be thoroughly cleaned and ground before applying the new layer.
  • The ideal temperature of application is between +15°C and +25°C, for which the product obtains optimal workability and curing time.
null

Surface: Concrete, cement

null

Application: Brush, roller or spray