FLOWCRET 1-10 is a self-leveling, polymer-modified, cement-based mortar, used for flooring applications. It forms a smooth and durable surface. Suitable for layers 1-10 mm thick. Certified according to EN 13813 and classified as CT-C30-F10-AR1. CE marked.
To prepare smooth and even interior concrete, mortar or terrazzo floors, before laying finishing materials like ceramic tiles, carpets, parquet, vinyl tiles, etc.
Substrate
The substrate must be dry, stable and also free of dust, grease, loose particles, etc. Primarily, the surface is primed with the acrylic primer UNI-PRIMER. Product application follows once the primer has completely dried (after approx. 2 h). Primer consumption: 200-300 g/m2.
The substrate must be dry, stable and also free of dust, grease, loose particles, etc. Primarily, the surface is primed with the acrylic primer UNI-PRIMER. Product application follows once the primer has completely dried (after approx. 2 h). Primer consumption: 200-300 g/m2.
Application
FLOWCRET 1-10 is gradually added into 5.50-6.00 l of water under continuous stirring, until a homogeneous, lump-free, low-viscosity mass is formed. The mixture is left for about 3 min. to settle and is then stirred again. A low speed electric mixer (approx. 300 rpm) is recommended for mixing. The mortar is poured onto the primed substrate in one layer and is spread to desired thickness with a large metal notched trowel, squeegee, etc. As soon as the product has self-levelled, it must be rolled immediately with a suitable spiked roller to release all the air retained within its mass. Following the completion of its application and after the required drying time has elapsed, FLOWCRET 1-10 should be covered or adequetely protected with a floor overlay (tiles, plastic flooring, resin coating, varnish, etc.). For greater layer thickness up to 30 mm, the use of FLOWCRET 3-30 EXPRESS is recommended.
FLOWCRET 1-10 is gradually added into 5.50-6.00 l of water under continuous stirring, until a homogeneous, lump-free, low-viscosity mass is formed. The mixture is left for about 3 min. to settle and is then stirred again. A low speed electric mixer (approx. 300 rpm) is recommended for mixing. The mortar is poured onto the primed substrate in one layer and is spread to desired thickness with a large metal notched trowel, squeegee, etc. As soon as the product has self-levelled, it must be rolled immediately with a suitable spiked roller to release all the air retained within its mass. Following the completion of its application and after the required drying time has elapsed, FLOWCRET 1-10 should be covered or adequetely protected with a floor overlay (tiles, plastic flooring, resin coating, varnish, etc.). For greater layer thickness up to 30 mm, the use of FLOWCRET 3-30 EXPRESS is recommended.
12 months from production date if stored in original, unopened packaging, in places protected from moisture and frost.
