IGROLUX by OIKOS is a special, low environmental impact, transparent, protective glaze which hardens once in contact with air. It is ideal for interior surfaces that are subject to abrasion. It is available in gloss and satin finishes and conforms to the norms D.I.N 53 754, D.I.N 54 004, D.I.N 52 615, D.I.N ISO 4626 and D.I.N 53 151. It is odourless, non-toxic, non flammable and environmentally friendly.

Ideal Use

As a protective glaze for interior, decorative products and surfaces in general.

Surface Preparation

Thoroughly clean the surface to be varnished and, if possible, rub down using very fine sand paper.

Application Method

Using a rroler or brush, apply two coats of IGROLUX by OIKOS undiluted, leaving approximately six hours between coats. It is also possible to apply the product by spray gun (nozzle 1,3 – 1,7 mm) after having diluted it with maximum 10% drinkable water. It is recommended to rub down the surface with very sandpaper between coats. In case of walls that are subject to continual abrasion, it is recommended to apply a third coat of the product.