ISOPAST-RUBBER

Elastomer bituminous emulsion consisting of high quality asphalt, resins and special additives. It has high durability in moisture and excellent elasticity. Provides excellent adhesion on various substrates like concrete, metal, wood etc. ISOPAST-RUBBER is used for waterproofing foundations, retaining walls, terraces, roofs, below ground level, water tanks on their outside surface etc.

Substrate
The surface to be sealed/protected must be completely clean and dry.

Application
ISOPAST-RUBBER should be thoroughly stirred before application. It is used as it is or diluted with water up to 30% by volume. ISOPAST-RUBBER is applied by brush or by spraying in 2 layers. The second layer is applied after the first one is completely dry. In case of reinforcement of the sealing layer with fiber mesh tape or polyester tape, is recommended to apply 3 layers of ISOPAST-RUBBER and embed the reinforcement on the first layer while is still fresh.

  • Vertical surfaces: 0.35-0.50 kg/m2/layer.
  • Horizontal surfaces, without reinforcement: 0.35-0.50 kg/m2/layer.
  • Horizontal surfaces, with reinforcement: 1.5-2.0 KG/M2.
null

Surface: Concrete, cement

null

Application: Roller