MARMOCRYL SILICONE-SILICATE Fine

MARMOCRYL SILICONE-SILICATE Fine is a pasty, white or colored silicate finish render with special silicone additives. It consists of aggregates of special particle size delivering a smooth decorative finish. It offers the following benefits:

  • High elasticity and excellent adhesion to the substrate.
  • Total water-repellency according to EN 1062-3.
  • Excellent vapor permeability and thus macimum breathability of the building.
  • No need for facade painting.
  • Resistance to alkalis according to DIN 18556.
  • Reinforced with polypropylene fibers for effective protection against cracking.
  • Simple, fast  application.
  • Part of ISOMAT THERMOSYSTEM certified external thermal insulation systems.
  • Suitable for interior and exterior application.

Certified according to EN 15824:2017. CE marked. MARMOCRYL SILICONE-SILICATE Fine has received an Environmental Product Declaration (EPD) following an assessment of its life-cycle environmental impacts. Registration No: S-P-09189, The International EPD System.
MARMOCRYL SILICONE-SILICATE Fine in used as a thin-coat render delivering a white or colored, water-repellent smooth-textured finish. Applicable to all common building materials including render, concrete, cement board, gypsum board, etc. Suitable for interior and exterior wall surfaces. It replaces the final coat in a rendering system. Thanks to its high elasticity and excellent adhesion to the substrate, it is the ideal final coat in external thermal insulation systems.

Substrate preparation
The substrate must be dry and free of dust, oil or grease, loose materials, etc. It should be primed with ML-PRIMER. Smooth or non-absorbent surfaces should be primed with PL-BOND. MARMOCRYL SILICONE-SILICATE Fine is applied, after the primer has dried.

Application
MARMOCRYL SILICONE-SILICATE Fine should be thoroughly stirred before application. This should be done with slow circular movements to avoid creating bubbles in the mass of the material. The render is applied by hand, using a smooth, stainless, metal trowel, or with a rendering machine. While still fresh (5-15 min after its application), the render is treated (pressed) with a plastic trowel. Working time depends on substrate absorbency and ambient temperature.

  • The natural aggregates used in the render can cause slight differences in color. For this reason and in order to achieve a uniform color result, it is recommended to use products of the same batch or to mix products of different batches. Moreover, the final color may be affected by the substrate, the ambient temperature and humidity.
  • Temperature during application should be between +5 oC to +35 oC.
  • While still fresh, MARMOCRYL SILICONE-SILICATE Fine should be protected from high temperatures, rain and frost.
  • Consult the safety instructions written on the packaging before use.
null

Surface: Concrete, cement boards

null

Application: Metal trowel