High quality pasty adhesive in a solvent solution. MONTAGE_S is based on caoutchouc and synthetic resins. It is used for fast and powerful bonding on almost all construction materials. No need for drilling, screwing or nailing. MONTAGE-S is suitable for direct bonding on almost all kinds of substrates, like wood frames and skirting boards, panels, wood floorings, wood and metallic baseboards, ceramic tiles, decorative frames, natural stones, wall sockets etc. MONTAGE-S is not suitable for bonding mirrors, polystyrene insulation boards or other materials sensitive to solvents.
Substrate
Substrate must be dry and free from dust, grease, etc.
Substrate must be dry and free from dust, grease, etc.
Application
MONTAGE-S is ready-to-use. The cartridge is inserted in the special hand gun and the nozzle is cut slantwise. For bonding light weight materials MONTAGE-S is applied on one surface in spots in a distance of 20 cm between them or strips. Then the surfaces are assembled by pressing down firmly or by using a rubber hammer. For bonding heavy weight materials or materials subject to pressure, MONTAGE-S is initially applied as mentioned above by putting both surfaces in contact with one another. Then they must be separated and wait for 5 minutes before readjusting the assembly by pressing down firmly or by using a rubber hammer. Heavy weight materials exceeding 10 kg/m2 must be supported for 8-24 hours.
MONTAGE-S is ready-to-use. The cartridge is inserted in the special hand gun and the nozzle is cut slantwise. For bonding light weight materials MONTAGE-S is applied on one surface in spots in a distance of 20 cm between them or strips. Then the surfaces are assembled by pressing down firmly or by using a rubber hammer. For bonding heavy weight materials or materials subject to pressure, MONTAGE-S is initially applied as mentioned above by putting both surfaces in contact with one another. Then they must be separated and wait for 5 minutes before readjusting the assembly by pressing down firmly or by using a rubber hammer. Heavy weight materials exceeding 10 kg/m2 must be supported for 8-24 hours.
