Classic style decorative material with modern design. The imagination of the designer and the skilled hand of an artisan create unique effects for every environment. Available in 3 versions: E (glossy), E OPAC (matte) and ES (iridescent).
Technical Qualities
MULTIDECOR by OIKOS offers the possibility to decorate in a classic style or according to the more modern, vivid interior decorations of today. A trowel, a cloth, a buffer par, a spray gun, a brush, a roller, a marine sponge, the imagination of a designer and the versatility of this product allow the expert hand of the applicator to create a unique, personalised, decorative effect that can be adapted to suit the environment to be decorated. The composition of MULTIDECOR by OIKOS, based on acrylic resins in water dispersion and special metallic and pearly components make the highly flexible in terms of the variety of decorative effects that can be achieved. MULTIDECOR is available in three versions: E(gloss), E OPAC (mat) and ES (iridescent). The product is washable. It conforms to the norms D.I.N 53 778 S-SM, has a low odour level, is non inflammable is friendly to both humans and the environment.
Ideal Use
Wall decoration, interior design, laminated surfaces, PVC, metal, wood.
Surface Preparation
Before applying and working with MULTIDECOR by OIKOS it is necessary to carry out the correct preparation of the surface according to the type of substrate.
Civil and gypsum plasters: smooth over the surface and seal over any marks caused by smoke, fat or glue applying, by roller or brush, the fixative CRILUX or NEOFIX by OIKOS.
Wood: even over the surface using a filler, sand down and then coat in FUNDGRAP by OIKOS. Plastic laminates, aluminium and non porous surfaces: remove any grease and sand down the surface. Following this apply the primer FUNDGRAP by OIKOS.
Iron: apply a good antirust coating such as NOVALIS ANTIUGGINE by OIKOS, follow this by applying the primer FUNDGRAP by OIKOS.
Application method
After having prepared the substrate, apply two coats of the MULTIFUND by Oikos or ULTRASATEN by OIKOS, in the chosen colour shade, in order to obtain a non absorbent surface ideal for the working of MULTIDECOR. On drying, after approcimately 4-6 hours, proceed with the application of the finish coat of MULTIDECOR by Oikos:
Pennellato finish (Brush): apply by brush Pennello Oikos Multidecor diluted 10% with drinkable water, proceed to spread a thin coat crossing over the brush strokes in order to obtain an even distribution over the whole surface. After that, immediately pass over the same part of the surface with the Brush empty, in order to evenly distribute the product over the surface. After that, immediately pass over the same part of the surface with the Brush empty, in order to evenly distribute the product over the surface. After drying apply a second coat to make stronger the decorative effect. Yield 15-20 m2/l one coat.
Tampone finish (Bristle pad): apply by Spanish brush Multidecor diluted 10% with drinkable water, create circles over the whole surface by twisting the Bristle Pag by OIKOS. The circle created should fill the whole surface. Apply the product over a square metre at a time. We recommend that a frame of 5 cm around the decorated area should be left in order to use the tools on the corners. Yield 5-7 m2/l one coat.
Spatola Dentata finish (Toothed trowel): apply by Snpanish brush Multidecor diluted 5% with drinkable water, create small arcs. Before drying, immediately work over the product using the indicated Toothed trowel Spatola Dentata by Oikos, crossing small arcs. The arcs created should fill the whole surface. Remove any excess product that may have accumulated on the trowel. Yield 5-6 m2/m one coat.
Rullo in tedduto finish (Cloth Roller): apply with short hair roller (special Roller by Oikos) a even of Multidecor diluted 10%, before drying, proceed to pass over the products more times using the indicated Cloth Roller from bottom to top. Put the roller on a pole to create an even effect over the whole surface. We recommended that a frame of 5 cm around the decorated area should be left in order to use the tool on the corners. We recommend to use light colours in order to hide from view joints. Yield 5-7 m2/l one coat.
Pennellessa finish (Spanish brush): apply the first coat of Multidecor diluted by 10-15%, in the chosen direction (horizontal, vertical or diagonal), using the Spanish brush, immediately pass over the same part of the surface with the Brush empty, in order to evenly distribute the product over the surface. Wait until dry before applying a second coat of the product in the same way as before. Yield 5-7 m2/l one coat.
Guanto in spugna finish (Sponge Glove): apply by Spanish brush Multidecor diluted 5% with drinkable water, immediately and immediately dab the surface using the indicated Guanto Imperium in order to evenly distribute the product over the surface. Yield 8-10 m2/l one coat.
Spugna Marina finish (Natural Sponge): wet the flat part of the Natural sponge by Oikos with undiluted Multidecor, liminate any exceeds product on a plank, then dab the surface. It is possible using one more colour applying a second coat in the same way as before. Yield 8-10 m2/l one coat.
Finish
To achieve a bright finish with brilliant reflections, it is possible to mix the additive Decorglitter by Oikos. To protect better MULTIDECOR from wear and aging, apply the special transport, protective varnish WATINS LUX or IGROLUX by OIKOS.
Safety information
The product is free from heavy metals such as chromium or lead. It contains no toxic solvents, aromatics or chlorides. Hazardous polymerisation does not occur. The product is a non-toxic substance if used technically correctly. We suggest normal precautionary measures for the handling of water-based paints. No special arrangements are required for storage and movement; containers, debris and spills, should be cleaned up using absorbent inert material such as sand, earth, etc., and must be disposed of in accordance with national or regional standards. The transport of these goods must be in compliance with international aggrements.
Product specifications
Thoroughly clean the surface, removing any loose or flaking material. Apply an insulation or CRILUX NEOFIX BY OIKOS and wait until dry. Apply two coats of acrylic primer, such as ULTRASATEN by OIKOS, matt, so as to obtain a suitable surface for the finishing products, MULTIDECOR by OIKOS, in accordance with DIN 53 778. Apply the chosen finish using the fools recommended to obtain the desired effect. Everything must be carried out in accordance with the rules for the application.