MULTIFILL 2-5 is a cement-based, colored tile grout offering high mechanical strength and excellent color stability. Suitable for joint width 2-5 mm. Classified as type CG2 WA tile grout according to EN 13888. 
MULTIFILL 2-5 is used for grouting tile joints on walls or floors, for indoor and outdoor applications.

Substrate
The substrate covered with tiles should be perfectly clean. The joints should be carefully cleaned and dampened with a wet sponge. 

Application
MULTIFILL 2-5 is added to water under continuous stirring, until a homegeneous paste is formed. A low-speed  mixer is recommended for the mixing. The mixture should be left to stand for about 3 min and then slightly stirred again. Spread the grout diagonally across the joints using a rubber float, making sure to fill them completely. The excess material should be wiped after a while, using a wet sponge, to avoid any change in color. Finally, the surface may be cleaned  with a dry cloth. For use outdoors or at high temperatures, repeated dampening is recommended after a few hours and when the grout has dried.