One-component, colored elastic joint sealant offering high elasticity, excellent adhesion to the substrate, resistance to moisture and temperature variations (-40 oC to +150 oC) and durability to weathering. Suitable for joints 3-40 mm wide. MULTIFILL-ELASTIC is used for grouting all types of wall and floor tiles to a variety of substrates where high elasticity is required (e.g. (expansion joints etc.). Suitable for interior and exterior applications.
Substrate preparation
Joints must be clean, dry and free from dust, oil, grease, etc. To avoid undesired soiling at joint edges, use masking tape to cover the face edges of the joint to be treated.
Application
Insert the cartridge in the special gun and cut the nozzle slantwise, so that it does not fit into the joint but barely touches and slides along the edges. Apply the sealant by driving the cartridge along the joint axis at a 45 o angle. While material is still fresh, spray joints with water and then press the sealant with your fingertip to obtain a smooth finish. Remove the masking tape immediately after application is completed.
