MULTIFILL-MARBLE 0-3  is a colored, cement based, enriched with resins grout for marbles, granites and tiles. It offers high mechanical strength, superb color stability and great water-repellence. It provides a smooth and glossy final surface. Suitable for joint widths between 0-3 mm. It is classified as a CG2 WA tile grout, according to EN 13888. MULTIFILL-MARBLE 0-3 is used for pointing marble, granite, tile and glass mosaic joints, on walls or floors, for indoor and outdoor applications, including swimming pools.

Substrate preparation
The substrate covered with marbles or tiles should be perfectly clean. The joints should be carefully cleaned and dampened with a wet sponge.

Application
MULTIFILL-MARBLE 0-3 is added to water under continuous stirring, until a uniform paste is formed. A low-speed mixer is recommended for the mixing. The mixture should be left to settle for about 3 minutes and then slightly stirred again. Spread the grout on to the joints, using a rubber float in a giagonal direction to the joints, in order to completely fill them. The excess material should be wiped after a while, using a wet sponge. Finally, the surface may be cleaned with a dry cloth. In case of exterior applications or high temperatures, it is recommended to dampen the joint after a few hours and when the grout has dried.