Water-based emulsion with highly penetrating ability based on nano-molecular structure. When applied on unporous surfaces, it seals and protects them from moisture and stains. After drying, it is transparent. It is UV-stable, in that it does not turn yellow over time, while allowing building breathability. No skin formation is observed on the application surface or any alteration in its appearance. Certified according to EN 1504-2 and classified as a hydrophobic impregnation. CE marked. NANOPRO-M is used to protect from stains unporous substrates such as surfaces of polished marbles, granites, tiles, porcelain, etc. Suitable for indoor and outdoor application.

Substrate
The surface to be primed must be dry and free of dust, grease, dirt etc.

Application
NANOPRO-M is thoroughly stirred and uniformly applied on the substrate by brush, roller or spraying, 10-15 minutes after the application and before dried, the excessive material is removed using a wet cloth. For surfaces that are very sensitive to stains a second layer can be applied within 3 hours after the first one. Total resistance in absorbing moizture is achieved 7 days after the application.