PL-BOND  is an adhesion primer consisting of synthetic resins and quartz sand. It is used on smooth or non-absorbent surfaces instead of the spatterdash (rough cast) layer, in order to increase the  adhesion of the subsequent plaster or render layer. After its application, it offers a rough surface resistant to alkaline environments. PL-BOND is used as a ready-to-use primer to ensure adequate roughness on the substrate, so that the adhesion of the subsequent plaster or render layer is reinforced. The surface formed is resistant to alkalis and therefore constitutes an ideal substrate for gypsum plasters. Suitable for indoor and outdoor use.

Substrate preparation
The surface to be primed must be dry and completely free of dust, grease and other contaminants.

Application
The content of the plastic container should be well stirred before use, until a homogeneous mixture is formed. PL-BOND is applied to the surface by brush or roller in one layer. After drying, the plaster or render may be applied.
PL-BOND is supplied in 1kg, 5kg and 20 kg plastic containers. 24 months from production date if stored in original, unopened packaging at temperatures between +5 oC and +35 oC. Protect from direct sunlight and frost.