SCREED-60 EXPRESS

SCREED-60 EXPRESS is a pre-blended (just add water), fast-curing and low-shrinkage cement screed for fast floor leveling and smoothing applications where floor leveling and smoothing applications where floor coverings are to follow. It is characterized by high initial and final strength, strong adhesion to the substrate and excellent workability. Provides a level and durable surface that can receive  floor finish in a short period.Suitable for indoor and outdoor applications up to 60 mm thickness. Ideal for fast filling, smoothing and leveling of floors in commercial, residential and office spaces where fast floor covering installation is required. Suitable for laying cement screeds above underfloor heating systems.

Substrate

The substrate must be stable, dry, free from rising damp, dust, grease, loose materials or other contaminants that may impair the adhesion of SCREED-60 EXPRESS.

Application

Slowly pour a 25 kg of SCREED-60 EXPRESS into a container with 1.9 l of water while stirring. Mix for a minimum of  5 minutes using a low-speed mixer (300 rpm) until  a lump-free mix with semi-dry consistency is formed. SCREED-60 EXPRESS is applied according to the general practices used in conventional cement floors. Apply the mixed material onto the prepared substrate using screed guides and then tamp it down with a screed bar/straight edge to ensure proper compaction prior to leveling and smoothing with a float to obtain the desired final result. For application thicknesses between 10-60 mm to non-absorbent substrates such as ceramic tiles, it is recommended to apply first a bonding layer using ADIPLAST polymer latex, so as to ensure excellent  adhesion to the substrate. SCREED-60 EXPRESS is applied while the bonding layer is still fresh. 

  • Before installing SCREED-60 EXPRESS on substrates with rising damp, apply first a suitable waterproofing layer.
  • During application and at the start of the setting/hardening process, the material must be protected from rapid water loss due to high temperatures, sunlight or air currents.
  • Do not mix SCREED-60 EXPRESS with otherbinding materials (cement, gypsum, lime) respectively
  • Parquet, PVC and linoleum floorings may be installed after 4 days, once SCREED-60 EXPRESS is completely dry.
  • Suitable for laying floors ready to withstand foot traffic after 12 hours.
  • Before installing a parquet or plastic flooring, we recommend that the measured remaining moisture should be less than 2%.
  • Temperature during application must beat least +5ºC.
  • Do not use the mix that has already begun to set in the mixing tank
  • Do not use more water than instructed. Do not add more water to the mix that has already begun to set.
  • Due to cement content, the product reacts with water forming alkaline solutions, and thus is classified as irritnt.
  • Please consult the directions for safe use and precuations written on the packaging before use.
null

Surface: Concrete, cement

null

Application: Trowel