STERYLSAN by OIKOS is a revitalising and sanitising product for interior and exterior walls sufffering with mould and algae contamination. It is a product prepared using a range of active ingredients that work against all kinds of micro-organisms in the surface, thanks to its ability to penetrate deep inside the support. It does not wash away with water and maintains its anti-mould action over time.

Ideal Use

Interior and exterior walls with problems of mould and algae.

Surface Preparation

On substrates that are already affected by mould and algae, remove and neutralise any micro-organisms by applyin a coat of STERYLFIX by OIKOS.

Application Method

Apply a coat of STERYLSAN by OIKOS undiluted, using a brush or roller to perfectly revitalize the wall. Leave the product on the wall for at least 6 – 8 hours before proceeding to paint. This allows the full sanitizing of the wall even deep in the surface.

Safety Information

The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is classified as hazardous pursuant to the provisions set forth in the Regulations (CE) 1272/2008 (CLP) and subsequent amendments and supplements. For further information see the product Safety Data Sheet. No Special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.