ADINOL-RAPID 2H

Liquid admixture acting as a concrete hardening accelerator. It increases the early strength of concrete during the first 24 hours, also offering the following advantages:

  • Accelerates the early age hardening of concrete without negatively affecting the final strength.
  • Increases the early strength of concrete (<24 h).
  • Allows earlier removal of formwork and moulds.
  • Does not have air-entraining action.
  • Is free of chlorides and other corrosive constituents.
  • Is compatible with all kinds of Portland cement.

Certified according to EN 934-2:T7 and classified as hardening accelerator for concrete. Certificate No.: 0906-CPR-02412007/01.CE marked. ADINOL-RAPID 2H is recommended for use in concrete, where accelerated setting and hardening times are required, especially at low temperatures, for rapid formwork removal in pre-cast concrete, repairs in highway engineering, etc.

ADINOL-RAPID 2H is added:

  • to the mixing water, during the preparation of concrete
  • to the ready-mix concrete, just before use. In that case, it is necessary to stir the mixture for 4-5 minutes to achieve uniform dispersion of ADINOL-RAPID 2H.
  • 18 months from production date, if stored in original, unopened packaging, at temperatures between +5 oC and +35 oC. Protect from direct sunlight and frost.
  • The final result may differ, depending on the type of cement and the temperature of concrete and environment.
null

Surface: Concrete