ADINOL-RAPID

Liquid admixture that accelerates the setting time of concrete and allows concreting at low temperatures. It is free of chlorides and other corrosive ingredients and has no negative effect on concrete strength. Certified according to EN 934-2:T6 and classified as concrete set accelerating admixture. Certificate No.:0906-CPR-02412007/01. CE marked.
  • Concreting at low temperatures.
  • In case where fast work is required (anchoring, repair work, etc).

ADINOL-RAPID is added:

  • to the mixing water, during the preparation of concrete.
  • to the ready mix just before use. In that case, it is necessary to rotate the mixture for 4-5 min to achieve uniform dispersion of ADINOL-RAPID in the mix.

18 months from production date if stored in original, unopened packaging, at temperatures between -20 oC and +35 oC. Storage at very low temperatures can result in formation on crystals on the bottom of the container. The product must retur to a positive temperature and then be slightly agitated before using.

 

 

  • Special local regulations concerning production and placing of concrete have to be followed.
  • Concrete components (aggregates, water, cement) must be at temperatures higher than  0 oC.
  • Avoid adding water for better workability, keeping the water to cement ratio as low as possible.
  • REOTOL-SPL  concrete superplasticizer can be used in parallel.
  • The surface of concrete must be protected during settingwith plastic sheets or other available materials to reduce hydration heat losses.
null

Surface: Concrete

null

Application: Preparation