Acrulic protective coating for concrete with covering effect, colored. It forms a waterproofing protective layer, resistant to freeze-thaw cycles, to the basicly of concrete and to the penetration of CO2 ans SO2 gases. Anti-carbonation, prevents the rusting of the iron reinforcement of the concrete. Thanks to its very high vapor permeability, it can also be used on masonry, fiber cement or stone.
Technical Qualities
BETONCRYLL PIGMENTATO is a special, coloured, high coverage, acrylic protective paint for concrete. The product consist of organic pigments, titanium dioxide fillers and modified acrylic resins in water dispersion which procide a waterproof coating resistant to frost-thaw cycle and to the penetration of CO2 and SO2 gases. BETONCRYLL PIGMENTATO prevents the carbonation and the related oxidization of the concrete iron rods. The product can be used to decorate concrete walls or to rectify defects and deteriorated areas. The product prevents the development of moulds and algae. In the event that an even greater level of protection against mould and algae is needed, it is recommended to add the indicated additive STERYLPLUS to the product. Due to its high vapour-permeability the product can also be applied onto masonry, fibre cement and stone. It has a low odour level, is non-inflammable and is friendly to both humans and the environment.
Interior Use
Protection and decoration of reinforced concrete and exterior.
Surface Preparation
Carefully clean the surface to be treated removing any loose or flaking material, dust, smog stains or dirt by brushing thoroughly or washing the surface. New surfaces must be thoroughly dry and mature and free from grease.
Application Method
Onto old, powdery and chalking substrates, apply a coat of the transparent primer NEOKRYLL by OIKOS and allow 4-6 hours to dry. After the substrate is prepared, apply two coats of BETONCRYLL PIGMENTATO by brush, roller or spray gun, waiting 4 hours between coats. Dilute the product with 40% drinkable water for the first coat and 20% for the second.
Safety Information
The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non-dangerous substance is used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.
Specifications
Carefully clean the surface to be treated removing any loose or flaking material, dust, smog or dirt by brushing thoroughly or washing the surface. Onto old, powdery and chalking substrates, apply a first coat of a transparent primer such as NEOKRYLL by OIKOS. In case of new plasters, make sure the substrate is thoroughly dry and free from any grease or lubricants. After substrate preparation, apply two coats of an, acrylic, protective paint such as BETONCRYLL PIGMENTATO by OIKOS waiting 4 hours between coats. All must be carried out in accordance with the norms of application.