Antique-effect paint, filling, covering, breathable with very high resistance to abrasion. Available in the 03 version (with maximum particle size of 0.3 mm max) and 07 version (with maximum particle size of 0.7 mm).

Surface Preparation
Clean the surface to be decorated removing any loose or flaking material. On old and crumbling surfaces, it is recommended to apply a coat of NEOFIX by OIKOS. On surfaces that are in good condition, proceed to apply a coat of the primer IL PRIMER by OIKOS. Wait at least 8 hours before applying finishing products.

Application Method
Antique effect: usingg a brush, apply a coat of BIAMAX, diluted 10%-15% with drinkable water, crossing over the brush strokes.
Plaster type finish: using a stainless steel trowel, apply 2 even coats of BIAMAX 07, leaving 7-8 hours between coats. Before the second coat dries, proceed to smooth over the surface using the plastic trowel in circular movements.

Finishes and protection
To achieve a starry finish ‘Stellato”, it is possible to mix the Biamax the additive DECORGLITTER by OIKOS.

Safety Information
The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non-dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand,  soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.

Specifications
Clean the surface to be decorated removing any loose or flasking material. On old and crumbling surfaces, it is recommended to apply a coat of an acrylic sealer such as NEOFIX by OIKOS. On surfaces that  are in good condition, proceed to aply a coat of the primer IL PRIMER by OIKOS.
Antique effect: apply using a brush, a coat of BIAMAX, diluted 10%-15% with drinkable water, crossing over the brush strokes.
Plaster type finish: apply, using a stainless steel trowel, two even coats of BIAMAX 07, leaving 7-8 hours between coats. Before the second coat is fully dry, proceed to smooth over the surface in circular movements using a plastic trowel. All must be carried out in accordance with the norms of application.