Filler and bonding agent with high adherence for outdoor surfaces, smoothing, covering, acrylic, eco-friendly, with strong yield and economic saving. Pigmented in 600 hues resistant to the action of UV rays.

Technical Qualities
BLANKOR is a special pigmented, infilling, primer for exteriors. It consists of acrylic resins in water dispersion and titanium dioxide fillers. The product is highly pervasive, consolidates the surface and makes the absorption uniform. Thanks to its excellent hiding power, it allows saving on finishing products. BLANKOR can be applied on alkaline substrates, civil plasters, rough plasters, old walls, chalking or highly absorbent plasters. It has a low odour level, is non-inflammable and friendly to both humans and the environments. Compliant with CAM (Minimum Environmental Criteria), III level certification. EPD.

Ideal Use
Internal and external walls.

Surface Preparation
The surface to be treated must be thoroughly dry and mature. New plasters need at least 30 days for maturing and to allow complete carbonation of the support. Sand down or strip surfaces in order to remove imperfections and any loose or flaking materials. On restoration projects, leaks and water infiltrations must be completely repaired.

Application Method
Apply one coat of BLANKOR by OIKOS diluted with 50-80% drinkable water by using a brush, roller or spray gun (1.7 mm nozzle). Allow 6-8 hours to dry before the application of finish products.

Finishes
Finish products from the Oikos facade Division.

Safety Information
The product if free of heavy metals such  as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non-dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.

Specifications
Clean the surfaces to be decorated and remove any loose or flaking material. In case of new plasters, make sure the substrate is thoroughly dry. Apply one coat of a special fixing and fillin pigmented agent for external use based on acrylic resins, vapour permeability in Class V1, compliant with CAM (Minimum Environmental Criteria), III level certification EPD such as BLANKOR by OIKOS. Allow 6-8 hours to dry before proceeding in the application of finish products. All procedure must be carried out following closely all application instructions.