CERA PER STUCCO is a decorative wax in paste form, created to exalt the shine of stucco. Thanks to its quick and simple, one coat, application by trowel or sponge, it is possible to obtain excellent marble effects whilst still respecting the technique and the natural feel of the stucco finish on which the Cera per Stucco is applied. The additives in the product facilitate its application and make it easier to polish. Cera per Stucco protects the surface on to which it is applied making it rub resistant. It is non inflammable, has no added formaldehyde and is friendly to both humans and the environment.

Ideal Use

Polishing and protection of interior walls and furnishings coated with decorative stucco.

Surface preparation

Wait at least 6-8 hours after the application of the last coat of stucco and in any case until it is completely dry.

Application Method

Apply a single, even coat of CERA per STUCCO using a float (inox steel trowel). On uneven surfaces it is possible to apply the product using a synthetic sponge. To further enhance the shine, after 24 hours it is possible to polish the surface using a soft cloth. Attention: avoid leaving too much product on the surface because this colud cause the formation of light haloes.

Safety Information

The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non-dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.