CRILUX is a special, vapour permeable, acrylic primer for porous substrates. The technical characteristics of CRILUX allow it to penetrate deep into the substrate and completely seal the surface. It is ideal for use on powdering surfaces, gypsum screeds and new wall surfaces in general. In accordance to DIN 52 615 and DIN ISO 4624, the product has a low level of odour, is non inflammable and friendly to both humans and the environment.

Ideal Use

Interior walls.

Surface Preparation

Clean the surface to be painted, removing all loose material. With new plasters, ensure that the substrates is thoroughly mature and dry.

Application Method

Dilute CRILUX according to the surface conditions and apply using a roller or a brush. In the case of new plasters, make sure that the substrate is thoroughly dry.

Safety Information

The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to a non-dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and nationalregulations in force at that time. Transportation must be carried out in accordance with international agreements.

Specifications

Clean the surface, removing any loose material. Apply one or two coats of an acrylic sealer such as CRILUX by OIKOS, conform to norms DIN 52 615 and DIN ISO 4624, in order to obtain a perfectly sealed surface ready for the application of acrylic paints.