DOMOSIL-POOL is an acetic silicone for permanent water immersion (swimming pools, aquariums etc.), providing:
- High mechanical resistance and deformability.
- Resistance to temperature fluctuations from -50 oC to +200 oC.
- Excellent bonding to any king of building material.
- Great endurance to ageing and water.
DOMOSIL-POOL is appropriate for sealing vertical and horizontal joints 3-40 mm wide, for indoor and outdoor applications. It has very good adhesion on surfaces such as glass, porcelain (tiles, sanitary, products), aluminium etc. Suitable for sealing joints on aquariums, boats, glass-structures etc. It cannot be overpainted.
Substrate
Substrate must be free of dust, loose particles, grease etc. It is advisable that the joint is cleaned up using a paintbrush or a wire brush and then air-blasted. To avoid undersirable soiling at joint edges, a self-adhesive paper-tape is applied alongside the edges and then removed immediately after sealing the joint (before skin formation).
Application
Insert cartridge in the special gun and cut nozzle in a slant way so that as it does not fit into the joint but just touches and slides along the edges. Silicon is applied by driving the cartridge alongside the joint axis a 45o angle. While still fresh, silicone is leveled using a trowel or by finger.
