Ecological acrylic enamel for cast iron radiators, resistant to high temperatures. Thanks to its special formulation, it is an easy to use enamel, it does not drip and glue during the application process, it has great adhesion to the substrate, excellent coverage, expansion, resistance to abrasion and washing.

Technical Qualities
Ecological acrylic enamel, resistant to high temperatures, for cast iron radiators. Thanks to its formulation, it is easy to use, does not drip or run during application. It presents a high adhesion to surfaces, good coverage, dilation and resistance to abrasion and washing.

Ideal Use
Protection and decoration of radiators.

Surface Preparation
Clean the surface to be treated, removing any loose materials. Clean any traces of dirt or grease using appropriate products. Sand down and treat rusted areas with a coat of CONVERTITORE ECOLOGICO by OIKOS followed by one coat of ANTIRUGGINE ECOLOGICO by OIKOS.

Application Method
Apply by brush or roller two coats of ECOSMALTO THERMO diluted 5-10% drinkable water, leaving 6 hours between coats. To apply by spray gun, dilute the product 10-15% drinkable water. Wait at least 24 hours before heating the radiator.

Safety Information
The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non dangerous substrance is used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.

Specifications
Thoroughly clean the surface to be treated, removing any loose materials. Sand down, remove grease or dirt marks using suitable products. Apply two coats of ECOSMALTO THERMO by OIKOS. All must be carried out in accordance with the norms of application.