EKOSTRIPPER is an ecological stripper for removing any kind of synthetic paint from every surface. The product can strip more coats of paint when left on the surface for the required time. The total absence of dangerous emissions even allow its being used in ventilated interiors. The slight coloration of EKOSTRIPPER helps insure an even application of the product over the whole surface.

Ideal Use 

Interior and exterior surfaces coated with synthetic products

Surface Preparation

Apply EKOSTRIPPER by using a bruh or trowel and wait 1 to 24 hours according to the coats of paint to be removed. The consistency of the product makes it possible to even be applied on vertical surfaces. After having left the product to act on the surface, remove both EKOSTRIPPER and the underlying paint coats using a spatula or a scraper then clean the treated surface with water.

Safety Information

The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymeriation. The product is considered to be a non-dangerous substance if used in the technically correctmanner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as san, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carriedout in accordance with international agreements.

Specifications

Apply a paint stripper such as EKOSTRIPPER by OIKOS leaving the product to act accoding to the number of coats to be removed. The consistency of the product makes it possible to even be applied on vertical surfaces. Proceed to then scrape the surface and following this, clean the treated surface with water.