EPOMAX-L10 is a two-component, colorless epoxy system, without solvents, offering very strong adhesion to concrete and steel, as well as high compressive and flexural strength, even when applied on damp substrates. It commplies with the requirements of ASTM C 881-90, Type I, Grade 1, Class B+C. It is classified as a product for concrete injection, according to EN 1504-5. Certificate Nr. 2032-CPR-10.11. EPOMAX-L10 is used to repair concrete cracks 0,5-3.0 mm wide by injection, in order to bond and restore the original monolithic structure. It is also used to install and anchor reinforcement rods into existing concrete elements.
Substrate preparation
The application surface should be free of materials that prevent bonding, dust, grease, loose particles etc. and without standing water.
Mixing of the components
Components A (resin) and B (hardener) are packed in two separate containers, having the correct predetermined mixing proportion by weight. The whole quantity of comp. B is added into comp. A. The components should be mixed for about 5 minutes, using an appropriate hand tool. It is important to stir the mixture thoroughly near the sides and bottom of the container, in order to achieve uniform dispersion of the hardener. In case less quantity is required than the one available in the package, 4 parts by weight of comp. A and 1 part by weight of comp. B should be poured into a clean container and mixed as above.