EPOMAX-L20

EPOMAX-L20 is two-component, colorless epoxy system, without solvents, offering very strong adhesion to concrete and steel, as well as high compressive and flexural strength, even when applied on damp substrates. It is classified as a product for concrete injection, according to EN 1504-5. EPOMAX-L20 is used to repair concrete cracks 0,1-1,0 mm wide by injection, in order to bond and restore the original monolithic structure. It is also used to install and anchor reinforcement rods into existing concrete elements.

Substrate preparation
The application surface should be free of materials that prevent bonding, dust, grease, loose particles etc. and without standing water.

Mixing of EPOMAX-L20
Components A (resin) and B (hardener) are packed in two separate containers, having the correct predetermined mixing proportion by weight. The whole quantity of comp. B is added into comp. A. The components should be mixed for about 5 minutes, using an appropriate hand tool. It is important to stir the mixture thoroughly near the sides and bottom of the container, to achieve uniform dispersion of the hardener.

  • The workability of epoxy materials is affected by temperature. The ideal temperature of application is between +15 oC and +25 oC, so that the product obtains optimal workability and curing time. Room temperature below +15 oC will expand the curing time, while temperatures above +30 oC will reduce it. It is recommended to mildly preheat theproduct in the winter, and store the product in a cool room before application in the summer. 
  • After hardening, EPOMAX-L20 is totally safe for health
null

Surface: Concrete, cement

null

Application: Trowel