EPOXYCOAT-AC

EPOXYCOAT-AC is a two-component, colored epoxy system with solvents, offering high strength and abrasion resistance. It is highly resistant to organic and inorganic acids, alkalis, petroleum products, solvents, water, seawater, etc. It offers excellent protection against corrosion to metal surfaces. Certified according to EN 1504-7 and classified as a product for reinforcement corrosion protection. Certificate No.:2032-CPR-10.11.

Application – Consumption

a) As a primer

EPOXYCOAT-AC is applied by roller, brush, or spray in two coats. The second coat follows after the first has dried but within 24 hours. Painting with EPOXYCOAT-W, EPOXYCOAT-VSF, EPOXYCOAT, or EPOXYCOAT-S epoxy coating should follow within the next 24 hours.

b) As a paint

EPOXYCOAT-AC is applied by roller, brush or spray in 3-4 coats. Every next coat follows after drying of the previous one but within 24 hours

  • EPOXYCOAT-AC contains solvents. In cases of application in closed rooms, measures should be taken for good ventilation.
  • Bonding between successive coats may be severely affected by moisture or dirt
  • Epoxy coats should be protected from moisture for 4-6 hours after application. Moisture may whiten the surface or/and make it sticky. It may also disturb hardening. Faded or sticky coats in parts of the surface should be removed by grinding or milling and laid again.
  • In case recoat time is longer than predicted or old floors are to be laid again, the surface should be thoroughly cleaned and ground before application of the new coat.
  • After hardening, EPOXYCOAT-ACis totally safe for health.
  • Consult the directions for safe use and precautions written on the packaging before application.
null

Surface: Concrete, cement

null

Application: Brush, roller or spray