EPOXCOAT is two-component, colored epoxy system with solvents, offering high strength and abrasion resistance. It is resistant to acids, alkalis, petroleum products, water and seawater. Certified according to EN 1504-2 and classified as a coating for surface protection of concrete. Certificate No.: 2032-CPR-10.11 CE marked. EPOXYCOAT is used as a protective and decorative coating on cement-based substrates (e.g. concrete, plaster, cement screeds, etc.) and metal surfaces. Suitable for industrial units, laboratories, slaughterhouses, canned food factories, tunnels, wine factories, gas stations, car repair shops, etc.
Application-Consumption
EPOXYCOAT should be applied within 24 hours from priming and after the primer has dried. EPOXYCOAT is used as is or diluted up to 5% by weight with SM-27 special solvent. It is applied by roller, brush, or spray in at least 2 coats. The second coat should be applied after the first one has dried but within 24 hours.
EPOXYCOAT is supplied in containers (A+B) of 8 kg, with components A and B deliverd in separate containers with fixed mixing ratio.