ETICS PLASTER Fine

ETICS PLASTER Fine is a ready-to-use, pasty, white or colored, acrylic facade plaster consisting of aggregates with special particle size distribution, delivering a smooth decorative surface. Is used as e thin finishing coat of plastering works to create a white or colored, water-repellent smooth finish. Applicable to all kinds of building material like render, concrete, cement boards, gymsum boards, etc. Suitable for interior and exterior wall surface. It replaces the final coat of plaster. Thanks to its high elasticity and excellent bonding to the substrate, it is the ideal final coat for external thermal insulation systems.

Substrate preparation

The substrate must be dry and free of dust, oil or grease, loose materials, etc. It is then primed with FLEX-PRIMER. Smooth or non-absorbent surfaces should be primed with PL-BOND. ETICS PLASTER Fine is applied after the primer has dried.

Application

ETICS PLASTER Fine should be thoroughly stirred before application, in slow, circular motions to prevent air entrapment. The plaster is applied by hand, using a smooth, stainless steel trowel, or with a plastering machine. While still fresh (5-15 min, after its application), the plaster is treated (pressed) with a plastic trowel. Working time depends on the substrate absorbency and ambient temperature.

  • The natural aggregate used in the plaster can cause slight differences in color. For this reason and in order to archieve a uniform colorresult, it isrecommended to use products of the same batch or to mix products of different batches. Moreover, the final color may be affected by substrate temperature and humidity.
  • Temperature during application should be between +5°C to +35°C
  • While still fresh, ETICS PLASTER Fine should be protected from high temperatures, rain and frost
  • Consult the directions for safe use and precautions written on the packaging before use.
null

Surface: Concrete, cement

null

Application: Trowel