FIBRANgeo BP-ETICSplus (1000X600 mm) rigid stonewool insulation board is a natural inorganic fibrous product that is industrially produced from moltenrock spun into fibres, in accordance with European Standard EN 13162 (Thermal insulation products for buildings – Factory made mineral wool (MW) products).

Applications
Boards designed for thermal insulation, fire resistance and sound insulation applications on External Thermal Insulations Composite Systems:

• External walls

Complementary to the E.T.I.C.S application, FIBRANgeo CAPs (rigid stonewool insulation discs) are installed over the mechanical anchors’ heads, where FIBRANgeo BP-ETICS or FIBRANgeo BP-ETICSplus stonewool is used as part of a composite external thermal insulation system (ETICS), in order to liminate thermal bridges and optimize application of final render.

Application

FIBRANgeo products must be protected from getting wet before and on their application. If part of the product getswet, it must be dried before installation. Stonewool dries quickly and its insulating properties remain uncharged after drying. Packaging should be removed carefully just before the installation. 
Working areas should be  kept clean. Unnecessary or extensive contact of theskin andeyes withproducts off-cuts, fibres and dust should be avoided, and protective wear should be used (gloves, goggles, hats).
Products with facing AL, AX, YM and YA are not suggested for application with service temperature on the surface more than 90 oC while those with surface XA are not suggested for more than 66 oC.
Sufficient ventilation of the working areas should be ensured, whilst power cutting tools should always be equipped or supplemented with a machanical system of dust intake.