Mirrored glossy finish protector for NATURAL MARMORINO. Easy to apply on surfaces: it leaves the natural characteristic unchanged.
Technical Qualities
FINITURA AUTOLUCIDANTE by OIKOS is the finishing product for interior and exterior to be applied on MARMORINO NATURALE by OIKOS, so to obtain a gloss marble-like effect. The product is based on mature lime putty, it is easy to apply and allows a fast and easy polishing of the surface. The vapour permeability of the wall remains unaltered. One of the main characteristics of the product is that is bonds perfectly with MARMORINO NATURALE by OIKOS creating a compact layer on the surface that maintains a high permeability to water vapour. Its high alkalinity avoids the development of moulds and bacterial colonies. FINITURA AUTOLUCIDANTE by OIKOS has a low odour level, is non inflammable and friendly to both humans and the environment.
Ideal Use
Gloss finish for MARMORINO NATURALE by OIKOS on interior or exterior walls of prestigious/historically important buildings.
Surface Preparation
Apply two coats of MARMORINO NATURALE by OIKOS and wait at least 7-8 hours for drying.
Application Method
Spread a thin layer of PURE LIME FINISH for MARMORINO NATURALE by OIKOS with a stainless steel trowel and immediately polish the surface with it to obtain the gloss marble-like finish. Protect the surface from the rain during the first 24-48 hours from the application.
Finish
When applied in exterior it is advisable to secure a higher level of water-repellence and resistance to exterior conditions by applying PROTETTIVO PER STUCCO E MARMORINO by OIKOS. The protection with the wax should be conducted approx.7 days after application.
Safety Information
The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is classified as hazardous pursuant to the provisions set forth in the Regulation (CE) 1272/2008 (CLP) and subsequent amendments and supplements. For further information see the product Safety Data Sheet. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual split material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time. Transportation must be carried out in accordance with international agreements.
