FIX-RAPID

FIX-RAPID is a fast-setting cement showing a hardening reaction that starts immediately after the addition of water. FIX-RAPID is used for quick repair, fixing, anchoring, patching of cavities or holes, etc. and generally wherever high strength and fast application is necessary. FIX-RAPID may be applied on the floor, walls or ceilings in interior and exterior applications.

Preparation of substrate
The substrate must be clean, free of dust, oil, loose materials etc and should be thoroughly dampened, before the application of FIX-RAPID.

Application
FIX-RAPID is gradually added to water under continuous stirring, until a viscous, no-slump putty is formed suitable for patching or fixing works. Mixing time should not exceed 1 min. It is recommended to mix a small quantity every time because of the short working time.

12 months from production date if stored in original, unopened packaging, in places protected from moisture and frost.

  • The temperature during application should be at least +5oC.
  • Metallic surface that will be in contact with FIX-RAPID should be protected with a suitable anticorrosive coating.
  • In cases of extensive work or applications requiring increased thickness, FIX-RAPID may be mixed with 1-3 parts by volume of sand, before the addition of water. In case there will be a slight increase of setting time. Also, setting time may be extended as desired with the addition of ordinary cement.
  • During application the use of rubber gloves is recommended.
  • Material that has started to set must not be softened again with water.
  • Tools should be cleaned with water, immediately after use.
  • The product contains cement, which reacts as alkaline with water and is classified as irritant.
  • Consult the safety instructions written on the packaging before use.
null

Surface: Concrete, cement

null

Application: Trowel