FLEXIGRAP

FLEXIGRAP LISCIO is a water-based special primer with a smooth finish. This is a product beyong compare, which combines maximum performance and application simplicity with an ecological attitude without compromise. It is designed to never disappoint you, especially in the most difficult conditions (tiles, plastics, PVC, glass, wall, plasterboard), where other primers could cause you troubles. Flexigrap Liscio adheres where others fail to, It gives new life to any environment.

ADVANTAGES

  • Allows you to renovate any surface according to your taste and creativity.
  • Makes it possible to change a rrom style or refresh it without masonry works
  • Allows to save money in a clever, easy way
  • No need to renounce to the best quality
  • Ecological product with a very low VOC content

Ideal Use

Non-porous substrates or surfaces that cause problems of adhesion, such as: tiles, zinc sheets, plastic laminates, aluminium, PVC etc.,in interior and exterior.

AT HOME

Bathroom/kitchen/corridors/basement/garage/attic/ground floor room …

AT WORK

Kitchen of canteens and restaurants/shops/hotels/sheds/production units/companies/warehouses

Surface Preparation

Thoroughly clean the surface to be treated, remove grease using suitable products and sand down using fine sandpaper.

Application method

Apply by brush, roller or spray gun (1.3 – 1.7 mm nozzle) one coat of FLEXIGRAP LISCIO leaving 6 hours before applying finish coats.

Safety Information

The product is free of heavy metals such as lead or chrome. It does not contain toxic solvents, aromatics or chlorides. There is no risk of any dangerous polymerisation. The product is considered to be a non dangerous substance if used in the technically correct manner. Normal cautionary measures for the handling of water based paints are advised. No special arrangements are required for the storage, movement and transportation of the product; the containers, residue, eventual spilt material should be cleaned up using absorbent inert material such as sand, soil etc. and then disposed of in accordance with the regional and national regulations in force at that time.Transportation must be carried out in accordance with international agreements.

Specifications

Thoroughly clean the surface to be treated, remove grease marks using suitable products and sand down using fine sandpaper. Apply one coat of a water-based primer such as FLEXIGRAP LISCIO by OIKOS.